Best Tube Benders for Roll Cage

When it comes to making roll cages, car owners need to access quality tubing or pipe bender. A tube bender is a machine used to bend metal tubes or pipes as desired. High – performance tubing benders can design and create bends that can precisely adhere to your car’s framework.

best tube bender for roll cage

However, if you’re a novice, then it can be a daunting task to find the right tool to suit your needs. Creating safe and effective roll cages is no mean task in itself, but a lousy bending machine can ruin everything in an instant.

There are some features that I look for in a tube bender:

Bender type: You can get mandrel bending, roll bending, and ram-style bending.

Automation: You get manually operated or fully automatic benders.

Capabilities: The capabilities of tube bending machines can vary for different applications. There are benders for annealing and heat treating, end flattening, buffing, and polishing, etc.

I’ve tried out a bunch of the best tube benders for Roll Cage in the past and narrowed the list down to these ten items.

Review of the Best Tube Benders for Roll Cage

1. Yellow Jacket 60325 – Best Tube Bender for Roll Cage Overall

Yellow Jacket 60325


  • Quick change bending mandrels and shoes
  • Trouble-free ratchet mechanism
  • Index marks to locate bends
  • Includes reverse bending mandrel
  • Easy one-hand bending

The Yellow Jacket 60325 is a ratchet hand bender kit for easy one-hand bending of soft copper and soft aluminum. It has an effortless and controllable action and is easy to manipulate around long tube lengths.

A reverse bending mandrel is included in the kit. Although it is used for bending soft copper and soft aluminum, it can also be used for bending rigid copper (must be annealed before bending).

You can get a perfect quarter (eighth bend) in 20-30 seconds and an offset in about a minute. It comes with a trouble-free ratchet mechanism, which makes it easy to operate. It also has index marks to locate bends.

  • High-speed and time-saving tool
  • Makes perfect bends
  • Fewer chances of refrigeration leaks
  • Simple design
  • Bender may start kinking the pipe after a few uses

2. RIDGID 38048 – Best Tube Bender for Roll Cage Under Budget

RIDGID 38048


  • High-quality bending performance
  • Two-stage design
  • 16-inch Handles
  • Roll dies reduce tube flattening

RIDGID 38048 is a heavy-duty pipe bender designed to deliver high-quality tube bending performance. It is perfect for use with stainless steel or other hard tubings like steel and titanium.

The bender’s two-stage design provides in-place bending from 90 degrees to 180 degrees without crossing handles. It locks and unlocks with a simple half-turn rotation of the bending handle.

It comes with 16-inch handles with ergonomic, cushioned grips for more leverage and reduced force.

The roll dies in the bending carriage, lessen the force and tube flattening. It has gain marks on the front to ensure properly aligned bending angles.

You get perfect bends with lesser effort as compared to a conventional bender. A vice-clamp block built into the bending form provides extra stability. It has a ½ – inch outer diameter capacity and 1-1/2 – inch bend radius.

  • No distortion in the bends
  • Operates smoothly
  • 16-inch Handles
  • Lightweight
  • Large space required for handles

3. Woodward Fab WFB2 – Best Tube and Pipe Bender for Roll Cage

Woodward Fab WFB2


  • CNC machined components
  • Ratcheting style handle
  • Tube bender dies made of hardened steel
  • 29-inch handle
  • Bend up to 2 – inch diameter tubing

The Woodward Fab Tube and pipe bender can bend up to 2 – inch diameter tube (square or round). It features CNC – machined components for more precision. It comes with a 36 – inch handle and an engraved degree ring.

This bender utilizes several-tube benders to create precise bends as and when required. The dies are made of hardened steel.

However, before using the dice, ensure that they are clean and free from any defect and foreign materials. You can also enhance the performance of the die by oiling them before you use them.

It has a maximum bending capacity of 2 inches in diameter. It can be used to bend both square and round tubings.

It is the perfect choice for making roll cages, motorcycle frames, furniture, awnings, and canopies. The machine comes with a 29-inch handle and an engraved degree ring.

Woodward Fab’s team can also give you technical advice so that you can choose the proper accessories for the machine.

  • High performance and quality
  • Bends are smooth and rounded
  • Comes with a length of metal to make your stand
  • Comes with an engraved degree ring
  • It comes fully assembled
  • Sometimes a sticker is used as the degree wheel

4. Mophorn Pipe Tube Bender – Best Manual Tube Bender for Roll Cage

Mophorn Pipe Tube Bender


  • Seven dies
  • Long handle for superior operation
  • Compact design
  • Works for both square and round pipes
  • Made with high-quality carbon steel and aluminium alloy

This manual pipe bender by Mophorn is a useful tool to meet your needs. It is made of high-quality carbon steel and aluminum alloy and offers corrosion resistance.

It is lightweight, sturdy, portable, and durable. The long handle allows you to bend pipes with its wall thickness stock from 8mm up to 2mm.

It comes with seven round dies ranging from 3/8 – inch to 1 – inch. You can use these dies for customizing brackets and other machine support parts.

The rubber-covered handle provides better leverage and simplifies the bending process. It can bend pipes and tubes to any angle.

Its compact design makes it more versatile and easy to transport. It takes up very little space and can be used for both square and round tubes.

The bender is ideal for building industrial parts, chemical plant parts, machine manufacturing, construction equipment, etc.

  • Produces smooth bends with no flat spots
  • Dies are heavy cast iron and are smooth
  • Easy to set up and use
  • Sturdy and durable construction
  • Corrosion-resistance
  • Instructions are not very clear 

5. KAKA Industrial HB-8 – Best Durable Tube Bender for Roll Cage

KAKA Industrial HB-8


  • Solid steel frame
  • 8-ton forming jack
  • Steel forming dies
  • Five dies
  • Bending angles of 90 degrees

The KAKA Industrial HB-8 is a heavy-duty 8-ton hydraulic cage tube bender and features a sturdy design and a solid steel frame.

It comes with five different dies of 3/4″, 1″, 1-1/2″, 1-5/8″, 1-3/4″ diameter for round tubing. It is designed to bend steel and molybdenum tubing in a range from 3/4″ to 1-3/4″.

The sturdy steel frame and cast – iron base make the bending process stable and safe. The steel forming dies and cast followers make it a highly precise bending machine.

The machine is hydraulic backed and hand-operated, which makes the bending process easier.

It has a maximum bending capacity of 90 degrees. The five different dies allow more flexibility.

It is ideal for those wanting to customize tube components. They also leave the pipes without flattening or deforming the pipe edges.

  • Ideal for bending stainless steel tubing
  • Sturdy and durable construction
  • Easy to use
  • Provides high precision and flexibility
  • Sometimes it may leave a little bump on the tube

6. Happybuy Pipe Tube Bender – Best Multi Functional Tube Bender for Roll Cage

Happybuy Pipe Tube Bender


  • Copper coil motor
  • High quality flexible upper shaft
  • High accuracy nine round die set
  • 1400 rpm rotation speed

This Happybuy pipe tube bender comes with a copper coil motor. The high conductivity copper ensures that components can be made smaller, and the system can be more compact, providing higher efficiency. Its upper shaft controls the driven shaft up and down to bend pipes to any radian.

Its frame is constructed with heavy-duty steel. The bender uses a unique sliding mechanism that places formers quickly in the correct tube diameter position.

It can bend up to 0.008″ wall thickness tubing. It is suitable for steel, brass, copper, wrought iron, and aluminum tubes. Its telescoping handle bends round bar stock up to 5/8″ thick with a maximum width up to 1-15/16″.

The bender is ideal for thin-wall circular, square and rectangular tubes in construction and decoration businesses.

Happybuy bender comes with round and square die sets to meet your requirements. The reinforced chain design ensures its durability. You can even bend pipes into circular or arc shapes with this tube bender.

  • Can bend pipes to any radian required
  • Durable construction
  • Can bend pipes into arcs
  • Bent tubes are clear, smooth and of very low deflection
  • Roller dies seems fragile

7. SWAG Offroad 6HUKLA – Best Offroad Tube Bender for Roll Cage



  • 1250 – inch wall square material
  • Electronic digital display
  • 2-ton bottle jack
  • Built with black powder-coated steel and Chromoly machined components

The HULK by SWAG Offroad is a tubing roller capable of rolling material up to 2 x 2 inches. It is built with black powder-coated steel and Chromoly machined components, which make it long-lasting and sturdy.

It is made with a ¼” thick plate for the frame and a 2-ton bottle jack. It comes with roller bearings installed on both the outer non-drive dies as well as the center drive die. This ensures a smooth range of motion. It also has a matte-finish 3-way adjustable revolving handle.

With its textured and black powder-coated steel frame, internally threaded aluminum spacers, and green powder-coated handle, the roller has an exquisite look. The machine is delivered fully assembled and ready to use.

You can purchase several HULK accessories as well, which are sold separately.

It has 66 different dies available, including round tube dies, square dies, round pipe dies, and universal edge roller dies. You can also add the optional electric pipe threader adapter to speed up the bending process.

  • Easy and smooth operation
  • Accurate
  • Perfect for repeated rolling
  • Accessories are to be purchased separately
  • Connection between the plates can be unstable

8. Allstar Performance ALL10330 – Best Hydraulic Tube Bender for Roll Cage

Allstar Performance ALL10330


  • Welded steel frame
  • Cast aluminium shoes
  • Comes with set of dies
  • Bend up to 0.134 – inch

The Allstar Performance ALL10330 is a hydraulic round tubing bender designed for a hand-operated 8-ton hydraulic jack.

The package also includes set dies of your choice – 1-3/4″, 1-5/8″, 1-1/4″ 1-1/2″, and 1″. More dies are available, but you will have to buy them separately each.

The welded steel frame and cast aluminum shoes ensure durability for long time work.

Cast aluminum shoes are available with a 7 – inch radius for 1-5/8″, 1-1/2″, and 1-3/4″ round tubes, or a 5 – inch radius for 1-1/4″ and 1″ round tubes.

You can bend up to 0.134 – inch wall thickness mild steel tubing or 0.120 – inch wall thickness Chromoly tubing.

  • Dies are well-built with no distortions
  • Machine seems sturdy
  • Easy to operate
  • It will flatten the pipe if you don’t prep correctly
  • Hydraulic jack has to be bought separately

9. Superbuy Goplus 12 – Best Heavy Duty Tube Bender for Roll Cage

Goplus 12


  • Bend tubing up to 180 degrees
  • 12 tons capacity
  • Bending bars can be adjusted
  • Package includes six precision

The Goplus 12 ton is a heavy-duty hydraulic tube bender constructed with a steel frame. It can bend pipes up to 180 degrees smoothly to reduce your workload and increase efficiency.

The bending bars can be adjusted to distances of 8-1/2″, 11-1/4″, 12″, 16-3/4″, 19-1/2″ and 22-1/2″.

The hydraulic and pull-back spring system helps you get the bending job done quickly.

It is suitable for most kinds of metal tubes and is ideal for power construction, bridges or ships pipeline laying or repairing, and road building.

The package includes six precision – cast dies of 1/2”, 3/4”, 1”, 1-1/4”, 1-1/12” and 2″ to fully meet your requirements.

  • Easy to setup
  • Strong and durable construction
  • Tubes can be bent up to an angle of 180 degrees
  • Can be used to bend any type of pipes
  • Product is not packaged well
  • Some of the parts are flimsy

10. Baileigh RDB-050 – Best Tube Bender for Efficiency

Baileigh RDB-050


  • Anti – spring back mechanism
  • Bends up to 200 degrees in one go
  • Quick-release hook or arm inserts
  • Three bending speeds

The RDB-050 manual tube bender by Baileigh can bend up to 2.5 – inch OD mild steel and 2 – inch OD Chromoly pipes (having a wall thickness of 0.120 inches).

It can bend up to 200 degrees in one go. You wouldn’t need to stop and reset the machine.

The machine’s anti-spring-back mechanism holds each bend in place as the operator ratchets forward, ensuring a smooth operation.

It has three bending speeds to choose from – 4 degrees (for 2-inch OD Chromoly or 2.5-inch OD mild steel), 8 degrees (for intermediate materials), and 12 degrees (for lighter gauge materials) per pull.

All pivot points use aluminum-bronze bushings and thrust washers for longer life. The hook arm comes with quick release inserts in order to assist in changing over the machine to a different size of tubing.

  • Anti-spring-back mechanism is beneficial
  • Comes with a degree dial
  • Quick and efficient
  • Dies are not included in the package


These are the ten best tube benders for roll cages that have worked out best for me. Along with the products, I have also listed their features and their points of strengths and weaknesses to make it easier for you to compare.

I’ve mentioned the degree of bending, size, and type of the dies available, and what kind of tubes (material) each machine can work on. I hope that I’ve succeeded in helping you choose, or at least in pointing you in the right direction. Best of luck!